Features
Features & Benefits:
High Brightness
Our LED T8 Fluorescent Light Tube consists of high quality LEDs and can emit a higher brightness at much lower cost.
Easy Installation
Our LED T8 Fluorescent Light can be easily installed like a conventional T8 fluorescent light into the existing sockets.
Extended Life
With very little heat output, proper drive characteristics and high quality LEDs, our LED T8 Fluorescent Light Tube has a lifetime of up to 100,000 hours.
The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
Humidity/Moisture Resistant
With IP54 degree protection, our LED T8 Tube Light can operate normally even in a moist indoor environment.
Energy Saving!
Our LED T8 Fluorescent Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8 light tubes.
The LED T8 Fluorescent Light Tube is completely enclosed. The LEDs are surrounded by a Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T8 Tube is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8 series fixture!
Available in four different color temperature renderings:
Warm White: 3700 Kelvin; ~ 1500 lumens - Yellowish Light
Natural White: 4100 Kelvin; ~ 1500 lumens - Slight Pink
Daylight White: 5500 Kelvin; ~ 1550 lumens - Pure White
Cool White: 7000 Kelvin; ~ 1600 lumens - Bluish Light
Aluminum heat sink, 300 LED's, available in Warm White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescents . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is UL/MET/CE Approved. The products are also in accordance with CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.
This LED replacement tube can operate on a traditional ballast and starter without modification. We strongly recommend that a qualified individual remove any ballasts and starters to achieve full energy savings.
Due to the fact that this tube light can operate in both line and magnetic ballast mode, this tube does quickly flash then turn on after the driver senses the incoming voltages. This only happens on power up and is considered normal operation for this tube light.
** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.
|
